wangyan/CCU621M
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit: CCU621_M firmware project with BLE debug link support.

Browse Source 
Co-authored-by: Cursor <cursoragent@cursor.com>
This commit is contained in:
jiankalka
2026-07-08 17:28:36 +08:00
commit 9ceb218f80
1597 changed files with 724159 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Drivers/GD32H7xx_standard_peripheral/Source/gd32h7xx_ctc.c
+390
View File
@@ -0,0 +1,390 @@
/*!
\file gd32h7xx_ctc.c
\brief CTC driver
\version 2025-01-24, V1.4.0, firmware for GD32H7xx
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#include "gd32h7xx_ctc.h"
#define CTC_FLAG_MASK ((uint32_t)0x00000700U)
/* CTC register bit offset */
#define CTC_TRIMVALUE_OFFSET ((uint32_t)8U)
#define CTC_TRIM_VALUE_OFFSET ((uint32_t)8U)
#define CTC_REFCAP_OFFSET ((uint32_t)16U)
#define CTC_LIMIT_VALUE_OFFSET ((uint32_t)16U)
/*!
\brief reset CTC clock trim controller
\param[in] none
\param[out] none
\retval none
*/
void ctc_deinit(void)
{
/* reset CTC */
rcu_periph_reset_enable(RCU_CTCRST);
rcu_periph_reset_disable(RCU_CTCRST);
}
/*!
\brief enable CTC trim counter
\param[in] none
\param[out] none
\retval none
*/
void ctc_counter_enable(void)
{
CTC_CTL0 |= (uint32_t)CTC_CTL0_CNTEN;
}
/*!
\brief disable CTC trim counter
\param[in] none
\param[out] none
\retval none
*/
void ctc_counter_disable(void)
{
CTC_CTL0 &= (uint32_t)(~CTC_CTL0_CNTEN);
}
/*!
\brief configure the IRC48M trim value
\param[in] trim_value: 8-bit IRC48M trim value
\arg 0x00 - 0x3F
\param[out] none
\retval none
*/
void ctc_irc48m_trim_value_config(uint8_t trim_value)
{
/* clear TRIMVALUE bits */
CTC_CTL0 &= (~(uint32_t)CTC_CTL0_TRIMVALUE);
/* set TRIMVALUE bits */
CTC_CTL0 |= ((uint32_t)trim_value << CTC_TRIM_VALUE_OFFSET);
}
/*!
\brief generate software reference source sync pulse
\param[in] none
\param[out] none
\retval none
*/
void ctc_software_refsource_pulse_generate(void)
{
CTC_CTL0 |= (uint32_t)CTC_CTL0_SWREFPUL;
}
/*!
\brief configure hardware automatically trim mode
\param[in] hardmode:
only one parameter can be selected which is shown as below:
\arg CTC_HARDWARE_TRIM_MODE_ENABLE: hardware automatically trim mode enable
\arg CTC_HARDWARE_TRIM_MODE_DISABLE: hardware automatically trim mode disable
\param[out] none
\retval none
*/
void ctc_hardware_trim_mode_config(uint32_t hardmode)
{
CTC_CTL0 &= (uint32_t)(~CTC_CTL0_AUTOTRIM);
CTC_CTL0 |= (uint32_t)hardmode;
}
/*!
\brief configure reference signal source polarity
\param[in] polarity: reference signal source edge
only one parameter can be selected which is shown as below:
\arg CTC_REFSOURCE_POLARITY_FALLING: reference signal source polarity is falling edge
\arg CTC_REFSOURCE_POLARITY_RISING: reference signal source polarity is rising edge
\param[out] none
\retval none
*/
void ctc_refsource_polarity_config(uint32_t polarity)
{
CTC_CTL1 &= (uint32_t)(~CTC_CTL1_REFPOL);
CTC_CTL1 |= (uint32_t)polarity;
}
/*!
\brief select reference signal source
\param[in] refs: reference signal source
only one parameter can be selected which is shown as below:
\arg CTC_REFSOURCE_GPIO: GPIO is selected
\arg CTC_REFSOURCE_LXTAL: LXTAL is selected
\param[out] none
\retval none
*/
void ctc_refsource_signal_select(uint32_t refs)
{
CTC_CTL1 &= (uint32_t)(~CTC_CTL1_REFSEL);
CTC_CTL1 |= (uint32_t)refs;
}
/*!
\brief configure reference signal source prescaler
\param[in] prescaler: reference signal source prescaler
only one parameter can be selected which is shown as below:
\arg CTC_REFSOURCE_PSC_OFF: reference signal not divided
\arg CTC_REFSOURCE_PSC_DIV2: reference signal divided by 2
\arg CTC_REFSOURCE_PSC_DIV4: reference signal divided by 4
\arg CTC_REFSOURCE_PSC_DIV8: reference signal divided by 8
\arg CTC_REFSOURCE_PSC_DIV16: reference signal divided by 16
\arg CTC_REFSOURCE_PSC_DIV32: reference signal divided by 32
\arg CTC_REFSOURCE_PSC_DIV64: reference signal divided by 64
\arg CTC_REFSOURCE_PSC_DIV128: reference signal divided by 128
\param[out] none
\retval none
*/
void ctc_refsource_prescaler_config(uint32_t prescaler)
{
CTC_CTL1 &= (uint32_t)(~CTC_CTL1_REFPSC);
CTC_CTL1 |= (uint32_t)prescaler;
}
/*!
\brief configure clock trim base limit value
\param[in] limit_value: 8-bit clock trim base limit value
\arg 0x00 - 0xFF
\param[out] none
\retval none
*/
void ctc_clock_limit_value_config(uint8_t limit_value)
{
CTC_CTL1 &= (uint32_t)(~CTC_CTL1_CKLIM);
CTC_CTL1 |= (uint32_t)((uint32_t)limit_value << CTC_LIMIT_VALUE_OFFSET);
}
/*!
\brief configure CTC counter reload value
\param[in] reload_value: 16-bit CTC counter reload value
\arg 0x0000 - 0xFFFF
\param[out] none
\retval none
*/
void ctc_counter_reload_value_config(uint16_t reload_value)
{
CTC_CTL1 &= (uint32_t)(~CTC_CTL1_RLVALUE);
CTC_CTL1 |= (uint32_t)reload_value;
}
/*!
\brief read CTC counter capture value when reference sync pulse occurred
\param[in] none
\param[out] none
\retval the 16-bit CTC counter capture value
*/
uint16_t ctc_counter_capture_value_read(void)
{
uint16_t capture_value = 0U;
capture_value = (uint16_t)((CTC_STAT & CTC_STAT_REFCAP)>> CTC_REFCAP_OFFSET);
return (capture_value);
}
/*!
\brief read CTC trim counter direction when reference sync pulse occurred
\param[in] none
\param[out] none
\retval FlagStatus: SET or RESET
\arg SET: CTC trim counter direction is down-counting
\arg RESET: CTC trim counter direction is up-counting
*/
FlagStatus ctc_counter_direction_read(void)
{
if(RESET != (CTC_STAT & CTC_STAT_REFDIR)){
return SET;
}else{
return RESET;
}
}
/*!
\brief read CTC counter reload value
\param[in] none
\param[out] none
\retval the 16-bit CTC counter reload value
*/
uint16_t ctc_counter_reload_value_read(void)
{
uint16_t reload_value = 0U;
reload_value = (uint16_t)(CTC_CTL1 & CTC_CTL1_RLVALUE);
return (reload_value);
}
/*!
\brief read the IRC48M trim value
\param[in] none
\param[out] none
\retval the 8-bit IRC48M trim value
*/
uint8_t ctc_irc48m_trim_value_read(void)
{
uint8_t trim_value = 0U;
trim_value = (uint8_t)((CTC_CTL0 & CTC_CTL0_TRIMVALUE) >> CTC_TRIMVALUE_OFFSET);
return (trim_value);
}
/*!
\brief get CTC flag
\param[in] flag: the CTC flag
only one parameter can be selected which is shown as below:
\arg CTC_FLAG_CKOK: clock trim OK flag
\arg CTC_FLAG_CKWARN: clock trim warning flag
\arg CTC_FLAG_ERR: error flag
\arg CTC_FLAG_EREF: expect reference flag
\arg CTC_FLAG_CKERR: clock trim error flag
\arg CTC_FLAG_REFMISS: reference sync pulse miss flag
\arg CTC_FLAG_TRIMERR: trim value error flag
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus ctc_flag_get(uint32_t flag)
{
if(RESET != (CTC_STAT & flag)){
return SET;
}else{
return RESET;
}
}
/*!
\brief clear CTC flag
\param[in] flag: the CTC flag
only one parameter can be selected which is shown as below:
\arg CTC_FLAG_CKOK: clock trim OK flag
\arg CTC_FLAG_CKWARN: clock trim warning flag
\arg CTC_FLAG_ERR: error flag
\arg CTC_FLAG_EREF: expect reference flag
\arg CTC_FLAG_CKERR: clock trim error flag
\arg CTC_FLAG_REFMISS: reference sync pulse miss flag
\arg CTC_FLAG_TRIMERR: trim value error flag
\param[out] none
\retval none
*/
void ctc_flag_clear(uint32_t flag)
{
if(RESET != (flag & CTC_FLAG_MASK)){
CTC_INTC |= CTC_INTC_ERRIC;
}else{
CTC_INTC |= flag;
}
}
/*!
\brief enable the CTC interrupt
\param[in] interrupt: CTC interrupt enable source
one or more parameters can be selected which are shown as below:
\arg CTC_INT_CKOK: clock trim OK interrupt
\arg CTC_INT_CKWARN: clock trim warning interrupt
\arg CTC_INT_ERR: error interrupt
\arg CTC_INT_EREF: expect reference interrupt
\param[out] none
\retval none
*/
void ctc_interrupt_enable(uint32_t interrupt)
{
CTC_CTL0 |= (uint32_t)interrupt;
}
/*!
\brief disable the CTC interrupt
\param[in] interrupt: CTC interrupt disable source
one or more parameters can be selected which are shown as below:
\arg CTC_INT_CKOK: clock trim OK interrupt
\arg CTC_INT_CKWARN: clock trim warning interrupt
\arg CTC_INT_ERR: error interrupt
\arg CTC_INT_EREF: expect reference interrupt
\param[out] none
\retval none
*/
void ctc_interrupt_disable(uint32_t interrupt)
{
CTC_CTL0 &= (uint32_t)(~interrupt);
}
/*!
\brief get CTC interrupt flag
\param[in] int_flag: the CTC interrupt flag
only one parameter can be selected which is shown as below:
\arg CTC_INT_FLAG_CKOK: clock trim OK interrupt flag
\arg CTC_INT_FLAG_CKWARN: clock trim warning interrupt flag
\arg CTC_INT_FLAG_ERR: error interrupt flag
\arg CTC_INT_FLAG_EREF: expect reference interrupt flag
\arg CTC_INT_FLAG_CKERR: clock trim error bit interrupt flag
\arg CTC_INT_FLAG_REFMISS: reference sync pulse miss interrupt flag
\arg CTC_INT_FLAG_TRIMERR: trim value error interrupt flag
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus ctc_interrupt_flag_get(uint32_t int_flag)
{
uint32_t interrupt_flag = 0U, intenable = 0U;
/* check whether the interrupt is enabled */
if(RESET != (int_flag & CTC_FLAG_MASK)){
intenable = CTC_CTL0 & CTC_CTL0_ERRIE;
}else{
intenable = CTC_CTL0 & int_flag;
}
/* get interrupt flag status */
interrupt_flag = CTC_STAT & int_flag;
if(interrupt_flag && intenable){
return SET;
}else{
return RESET;
}
}
/*!
\brief clear CTC interrupt flag
\param[in] int_flag: the CTC interrupt flag
only one parameter can be selected which is shown as below:
\arg CTC_INT_FLAG_CKOK: clock trim OK interrupt flag
\arg CTC_INT_FLAG_CKWARN: clock trim warning interrupt flag
\arg CTC_INT_FLAG_ERR: error interrupt flag
\arg CTC_INT_FLAG_EREF: expect reference interrupt flag
\arg CTC_INT_FLAG_CKERR: clock trim error bit interrupt flag
\arg CTC_INT_FLAG_REFMISS: reference sync pulse miss interrupt flag
\arg CTC_INT_FLAG_TRIMERR: trim value error interrupt flag
\param[out] none
\retval none
*/
void ctc_interrupt_flag_clear(uint32_t int_flag)
{
if(RESET != (int_flag & CTC_FLAG_MASK)){
CTC_INTC |= CTC_INTC_ERRIC;
}else{
CTC_INTC |= int_flag;
}
}