wangyan/CCU621M
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit: CCU621_M firmware project with BLE debug link support.

Browse Source 
Co-authored-by: Cursor <cursoragent@cursor.com>
This commit is contained in:
jiankalka
2026-07-08 17:28:36 +08:00
commit 9ceb218f80
1597 changed files with 724159 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Drivers/GD32H7xx_standard_peripheral/Source/gd32h7xx_rtdec.c
+384
View File
@@ -0,0 +1,384 @@
/*!
\file gd32h7xx_rtdec.c
\brief RTDEC driver
\version 2025-01-24, V1.4.0, firmware for GD32H7xx
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#include "gd32h7xx_rtdec.h"
/* RTDEC firmware version offset macro */
#define ARE_FMVER_OFFSET (uint32_t)0x00000010U)
/*!
\brief reset RTDEC
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[out] none
\retval none
*/
void rtdec_deinit(uint32_t rtdec_periph)
{
if(RTDEC0 == rtdec_periph){
/* reset RTDEC0 */
rcu_periph_reset_enable(RCU_RTDEC0RST);
rcu_periph_reset_disable(RCU_RTDEC0RST);
}
if(RTDEC1 == rtdec_periph) {
/* reset RTDEC1 */
rcu_periph_reset_enable(RCU_RTDEC1RST);
rcu_periph_reset_disable(RCU_RTDEC1RST);
}
}
/*!
\brief initialize the parameters of RTDEC struct with default values
\param[in] none
\param[out] rtdec_parameter_struct: the initialized struct rtdec_parameter_struct pointer
\retval none
*/
void rtdec_struct_para_init(rtdec_parameter_struct* rtdec_struct)
{
/* configure the structure with default value */
rtdec_struct->access_mode = (uint8_t)RTDEC_MODE_DATA_ACCESS;
rtdec_struct->key_crc = 0x00U;
rtdec_struct->fw_version = 0x0000U;
rtdec_struct->key = 0x00000000U;
rtdec_struct->nonce = 0x00000000U;
rtdec_struct->start_addr = 0x00000000U;
rtdec_struct->end_addr = 0x00000000U;
}
/*!
\brief initialize RTDEC
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in] rtdec_area: RTDEC_AREAx(x = 0, 1, 2, 3)
\param[in] rtdec_struct: RTDEC parameter initialization stuct members of the structure
and the member values are shown as below:
access_mode: RTDEC_MODE_CODE_ACCESS, RTDEC_MODE_DATA_ACCESS, RTDEC_MODE_BOTH_ACCESS
key_crc: CRC value of area key
fw_version: area firmware version
key: area key
nonce: area nonce
start_addr: area start address
end_addr: area end address
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtdec_init(uint32_t rtdec_periph, uint32_t rtdec_area, rtdec_parameter_struct *rtdec_struct)
{
uint8_t key_crc_reg = 0U;
uint32_t key_nonce_addr = 0U;
/* write the correct MODE[1:0] value and firmware version in ARExCFG register */
RTDEC_ARE_CFG(rtdec_periph, rtdec_area) &= ~(uint32_t)(RTDEC_MODE | RTDEC_ARE_FMVER);
RTDEC_ARE_CFG(rtdec_periph, rtdec_area) |= ((uint32_t)(rtdec_struct->access_mode)) | (uint32_t)(((uint32_t)(rtdec_struct->fw_version) << ARE_FMVER_OFFSET);
/* program ARExKEY registers */
key_nonce_addr = (uint32_t)rtdec_struct->key;
RTDEC_ARE_KEY0(rtdec_periph, rtdec_area) = *(uint32_t *)key_nonce_addr;
key_nonce_addr += 4U;
RTDEC_ARE_KEY1(rtdec_periph, rtdec_area) = *(uint32_t *)key_nonce_addr;
key_nonce_addr += 4U;
RTDEC_ARE_KEY2(rtdec_periph, rtdec_area) = *(uint32_t *)key_nonce_addr;
key_nonce_addr += 4U;
RTDEC_ARE_KEY3(rtdec_periph, rtdec_area) = *(uint32_t *)key_nonce_addr;
/* check the key CRC */
key_crc_reg = (uint8_t)GET_BITS(RTDEC_ARE_CFG(rtdec_periph, rtdec_area), 8U, 15U);
if(key_crc_reg != rtdec_struct->key_crc){
return ERROR;
}
/* program ARExNONCE registers */
key_nonce_addr = (uint32_t)rtdec_struct->nonce;
RTDEC_ARE_NONCE0(rtdec_periph, rtdec_area) = *(uint32_t *)key_nonce_addr;
key_nonce_addr += 4U;
RTDEC_ARE_NONCE1(rtdec_periph, rtdec_area) = *(uint32_t *)key_nonce_addr;
/* write the start address and end address of area */
RTDEC_ARE_SADDR(rtdec_periph, rtdec_area) = rtdec_struct->start_addr;
RTDEC_ARE_EADDR(rtdec_periph, rtdec_area) = rtdec_struct->end_addr;
return SUCCESS;
}
/*!
\brief configure RTDEC area data attribute
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in] rtdec_area: RTDEC_AREAx(x = 0, 1, 2, 3)
\param[in] access_mode: allowed access mode of data
only one parameter can be selected which is shown as below:
\arg RTDEC_MODE_CODE_ACCESS: code/instruction access only
\arg RTDEC_MODE_DATA_ACCESS: data access only
\arg RTDEC_MODE_BOTH_ACCESS: code and data access
\param[in] firmware_version: 16-bit number, version of data
\param[out] none
\retval none
*/
void rtdec_config(uint32_t rtdec_periph, uint32_t rtdec_area, uint8_t access_mode, uint16_t firmware_version)
{
/* write the correct MODE[1:0] value and firmware version in ARExCFG register */
RTDEC_ARE_CFG(rtdec_periph, rtdec_area) &= ~(uint32_t)(RTDEC_MODE | RTDEC_ARE_FMVER);
RTDEC_ARE_CFG(rtdec_periph, rtdec_area) |= ((uint32_t)access_mode) | ((uint32_t)((uint32_t)firmware_version << ARE_FMVER_OFFSET);
}
/*!
\brief configure RTDEC key or register lock
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in] rtdec_area: RTDEC_AREAx(x = 0, 1, 2, 3)
\param[in]: lock_type: key lock or register lock
\arg: RTDEC_ARE_CFG_LK: register lock
\arg: RTDEC_ARE_K_LK: key lock
\param[out] none
\retval none
*/
void rtdec_lock(uint32_t rtdec_periph, uint32_t rtdec_area, uint32_t lock_type)
{
RTDEC_ARE_CFG(rtdec_periph, rtdec_area) |= lock_type;
}
/*!
\brief initialize RTDEC area address
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in] rtdec_area: RTDEC_AREAx(x = 0, 1, 2, 3)
\param[in]: saddr: area start address, the 4 MSB bits and the 12 LSB bits are ignored
\param[in]: eaddr: area end address, the 4 MSB bits and the 12 LSB bits are ignored
\param[out] none
\retval none
*/
void rtdec_addr_init(uint32_t rtdec_periph, uint32_t rtdec_area, uint32_t saddr, uint32_t eaddr)
{
/* write the start address and end address of area */
RTDEC_ARE_SADDR(rtdec_periph, rtdec_area) = saddr;
RTDEC_ARE_EADDR(rtdec_periph, rtdec_area) = eaddr;
}
/*!
\brief initialize RTDEC nonce, nonce follows little endian format
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in] rtdec_area: RTDEC_AREAx(x = 0, 1, 2, 3)
\param[in]: nonce: an array containing 64-bit nonce data, little endian format
\param[out] none
\retval none
*/
void rtdec_nonce_init(uint32_t rtdec_periph, uint32_t rtdec_area, uint32_t* nonce)
{
uint32_t nonce_addr = (uint32_t)nonce;
/* program ARExNONCE registers */
RTDEC_ARE_NONCE0(rtdec_periph, rtdec_area) = *(uint32_t *)(nonce_addr);
nonce_addr += 4U;
RTDEC_ARE_NONCE1(rtdec_periph, rtdec_area) = *(uint32_t *)(nonce_addr);
}
/*!
\brief initialize RTDEC key, key follows little endian format
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in] rtdec_area: RTDEC_AREAx(x = 0, 1, 2, 3)
\param[in]: key: an array containing 128-bit key data, little endian format
\param[out] none
\retval none
*/
void rtdec_key_init(uint32_t rtdec_periph, uint32_t rtdec_area, uint32_t* key)
{
uint32_t key_addr = (uint32_t)key;
/* program ARExKEY registers */
RTDEC_ARE_KEY0(rtdec_periph, rtdec_area) = *(uint32_t *)(key_addr);
key_addr += 4U;
RTDEC_ARE_KEY1(rtdec_periph, rtdec_area) = *(uint32_t *)(key_addr);
key_addr += 4U;
RTDEC_ARE_KEY2(rtdec_periph, rtdec_area) = *(uint32_t *)(key_addr);
key_addr += 4U;
RTDEC_ARE_KEY3(rtdec_periph, rtdec_area) = *(uint32_t *)(key_addr);
}
/*!
\brief get CRC value of RTDEC key data
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in] rtdec_area: RTDEC_AREAx(x = 0, 1, 2, 3)
\param[out] none
\retval CRC value
*/
uint8_t rtdec_key_crc_get(uint32_t rtdec_periph, uint32_t rtdec_area)
{
return (uint8_t)GET_BITS(RTDEC_ARE_CFG(rtdec_periph, rtdec_area), 8U, 15U);
}
/*!
\brief enable RTDEC area
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in] rtdec_area: RTDEC_AREAx(x = 0, 1, 2, 3)
\param[out] none
\retval none
*/
void rtdec_enable(uint32_t rtdec_periph, uint32_t rtdec_area)
{
RTDEC_ARE_CFG(rtdec_periph, rtdec_area) |= RTDEC_ARE_EN;
}
/*!
\brief disable RTDEC area
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in] rtdec_area: RTDEC_AREAx(x = 0, 1, 2, 3)
\param[out] none
\retval none
*/
void rtdec_disable(uint32_t rtdec_periph, uint32_t rtdec_area)
{
RTDEC_ARE_CFG(rtdec_periph, rtdec_area) &= ~RTDEC_ARE_EN;
}
/*!
\brief get RTDEC error flag
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in]: flag: error flag
only one parameter can be selected which is shown as below:
\arg RTDEC_FLAG_SEC_ERROR: security error flag
\arg RTDEC_FLAG_MODE_ERROR: access mode error flag
\arg RTDEC_FLAG_KEY_ERROR: key error flag
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus rtdec_flag_get(uint32_t rtdec_periph, uint32_t flag)
{
if(RESET != (RTDEC_INTF(rtdec_periph) & flag)){
return SET;
}else{
return RESET;
}
}
/*!
\brief clear RTDEC error flag
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in]: flag: error flag
only one parameter can be selected which is shown as below:
\arg RTDEC_FLAG_SEC_ERROR: security error flag
\arg RTDEC_FLAG_MODE_ERROR: access mode error flag
\arg RTDEC_FLAG_KEY_ERROR: key error flag
\param[out] none
\retval none
*/
void rtdec_flag_clear(uint32_t rtdec_periph, uint32_t flag)
{
RTDEC_INTC(rtdec_periph) |= flag;
}
/*!
\brief enable RTDEC interrupt
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in]: interrupt: interrupt type
one or more parameters can be selected which is shown as below:
\arg RTDEC_INT_SEC: security error interrupt
\arg RTDEC_INT_MODE: access mode error interrupt
\arg RTDEC_INT_KEY: key error interrupt
\param[out] none
\retval none
*/
void rtdec_interrupt_enable(uint32_t rtdec_periph, uint32_t interrupt)
{
RTDEC_INTEN(rtdec_periph) |= interrupt;
}
/*!
\brief disable RTDEC interrupt
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in]: interrupt: interrupt type
one or more parameters can be selected which is shown as below:
\arg RTDEC_INT_SEC: security error interrupt
\arg RTDEC_INT_MODE: access mode error interrupt
\arg RTDEC_INT_KEY: key error interrupt
\param[out] none
\retval none
*/
void rtdec_interrupt_disable(uint32_t rtdec_periph, uint32_t interrupt)
{
RTDEC_INTEN(rtdec_periph) &= ~interrupt;
}
/*!
\brief get RTDEC interrupt flag
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in]: int_flag: interrupt flag
only one parameter can be selected which is shown as below:
\arg RTDEC_INT_FLAG_SEC_ERROR: security error interrupt flag
\arg RTDEC_INT_FLAG_MODE_ERROR: access mode error interrupt flag
\arg RTDEC_INT_FLAG_KEY_ERROR: key error interrupt flag
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus rtdec_interrupt_flag_get(uint32_t rtdec_periph, uint32_t int_flag)
{
uint32_t interrupt_enable = 0U, interrupt_flag = 0U;
switch(int_flag){
/* RTDEC security error interrupt */
case RTDEC_INT_FLAG_SEC_ERROR:
interrupt_flag = RTDEC_INTF(rtdec_periph) & int_flag;
interrupt_enable = RTDEC_INTEN(rtdec_periph) & RTDEC_INT_SEC;
break;
/* RTDEC execute-only or execute-never error interrupt */
case RTDEC_INT_FLAG_MODE_ERROR:
interrupt_flag = RTDEC_INTF(rtdec_periph) & int_flag;
interrupt_enable = RTDEC_INTEN(rtdec_periph) & RTDEC_INT_MODE;
break;
/* RTDEC key error interrupt */
case RTDEC_INT_FLAG_KEY_ERROR:
interrupt_flag = RTDEC_INTF(rtdec_periph) & int_flag;
interrupt_enable = RTDEC_INTEN(rtdec_periph) & RTDEC_INT_KEY;
break;
default:
break;
}
/* get RTDEC interrupt flag status */
if(interrupt_flag && interrupt_enable){
return SET;
}else{
return RESET;
}
}
/*!
\brief clear RTDEC interrupt flag
\param[in] rtdec_periph: RTDECx(x = 0, 1)
\param[in]: int_flag: interrupt flag
only one parameter can be selected which is shown as below:
\arg RTDEC_INT_FLAG_SEC_ERROR: security error interrupt flag
\arg RTDEC_INT_FLAG_MODE_ERROR: access mode error interrupt flag
\arg RTDEC_INT_FLAG_KEY_ERROR: key error interrupt flag
\param[out] none
\retval none
*/
void rtdec_interrupt_flag_clear(uint32_t rtdec_periph, uint32_t int_flag)
{
RTDEC_INTC(rtdec_periph) |= int_flag;
}