#ifndef GPIO_H
#define GPIO_H

#include <stdint.h>

#ifndef __PIN_DEF_H
#define __PIN_DEF_H

#include "gd32h7xx.h" // 根据实际芯片替换

/* ==================== 板载继电器控制 (K1～K10) ==================== */
#define RELAY_K1_PORT    GPIOG
#define RELAY_K1_PIN     GPIO_PIN_4
#define RELAY_K2_PORT    GPIOG
#define RELAY_K2_PIN     GPIO_PIN_5
#define RELAY_K3_PORT    GPIOG
#define RELAY_K3_PIN     GPIO_PIN_6
#define RELAY_K4_PORT    GPIOG
#define RELAY_K4_PIN     GPIO_PIN_7
#define RELAY_K5_PORT    GPIOG
#define RELAY_K5_PIN     GPIO_PIN_8
#define RELAY_K6_PORT    GPIOC
#define RELAY_K6_PIN     GPIO_PIN_8
#define RELAY_K7_PORT    GPIOC
#define RELAY_K7_PIN     GPIO_PIN_9
#define RELAY_K8_PORT    GPIOG
#define RELAY_K8_PIN     GPIO_PIN_9
#define RELAY_K9_PORT    GPIOG
#define RELAY_K9_PIN     GPIO_PIN_10
#define RELAY_K10_PORT   GPIOG
#define RELAY_K10_PIN    GPIO_PIN_11

/* 快速操作宏（可选） */
#define RELAY_ON(port, pin)      gpio_bit_set(port, pin)
#define RELAY_OFF(port, pin)     gpio_bit_reset(port, pin)

/* ==================== 电子锁控制 ==================== */
#define ELOCK_A_PORT     GPIOK
#define ELOCK_A_PIN      GPIO_PIN_1
#define ELOCK_B_PORT     GPIOK
#define ELOCK_B_PIN      GPIO_PIN_2


/* ==================== 绝缘监测开关控制 ==================== */
#define INSA_GND_PORT    GPIOE
#define INSA_GND_PIN     GPIO_PIN_4      // INSA_CTL
#define INSA_POS_PORT    GPIOE
#define INSA_POS_PIN     GPIO_PIN_3      // UNBALA_CTL

#define INSB_GND_PORT    GPIOA
#define INSB_GND_PIN     GPIO_PIN_5      // INSB_CTL
#define INSB_POS_PORT    GPIOE
#define INSB_POS_PIN     GPIO_PIN_5      // UNBALB_CTL

/* ==================== LED 指示灯 ==================== */
#define LED_RUN_PORT     GPIOG
#define LED_RUN_PIN      GPIO_PIN_15
/* ==================== 连接确认模式选择 ==================== */
#define CHK_CSA_PORT     GPIOF
#define CHK_CSA_PIN      GPIO_PIN_8
#define CHK_CSB_PORT     GPIOF
#define CHK_CSB_PIN      GPIO_PIN_2

/* ==================== 内部控制输出 ==================== */
#define WDO_PORT         GPIOE
#define WDO_PIN          GPIO_PIN_2

#define ESP8685_EN_PORT  GPIOB
#define ESP8685_EN_PIN   GPIO_PIN_7

/* FC41D 蓝牙/WiFi 模组复位（PE6，高有效，常态低） */
#define FC41D_RST_PORT     GPIOE
#define FC41D_RST_PIN      GPIO_PIN_6
#define BLUE_EN_PORT       FC41D_RST_PORT   /* 兼容旧名 */
#define BLUE_EN_PIN        FC41D_RST_PIN

#define CIU_RST_PORT     GPIOA
#define CIU_RST_PIN      GPIO_PIN_10

/* ==================== 温度通道地址选择 ==================== */
#define TEMP_ADDR_A_PORT GPIOD
#define TEMP_ADDR_A_PIN  GPIO_PIN_10
#define TEMP_ADDR_B_PORT GPIOD
#define TEMP_ADDR_B_PIN  GPIO_PIN_13
#define TEMP_ADDR_C_PORT GPIOJ
#define TEMP_ADDR_C_PIN  GPIO_PIN_8

/* ==================== 开关量输入 (DI) ==================== */
// YX 系列
#define YX1_PORT         GPIOC
#define YX1_PIN          GPIO_PIN_0
#define YX2_PORT         GPIOB
#define YX2_PIN          GPIO_PIN_0
#define YX3_PORT         GPIOF
#define YX3_PIN          GPIO_PIN_14
#define YX4_PORT         GPIOB
#define YX4_PIN          GPIO_PIN_1
#define YX5_PORT         GPIOF
#define YX5_PIN          GPIO_PIN_15
#define YX6_PORT         GPIOB
#define YX6_PIN          GPIO_PIN_2
#define YX7_PORT         GPIOG
#define YX7_PIN          GPIO_PIN_0
#define YX8_PORT         GPIOF
#define YX8_PIN          GPIO_PIN_11
#define YX9_PORT         GPIOE
#define YX9_PIN          GPIO_PIN_11
#define YX10_PORT        GPIOF
#define YX10_PIN         GPIO_PIN_12
#define YX11_PORT        GPIOE
#define YX11_PIN         GPIO_PIN_15
#define YX12_PORT        GPIOF
#define YX12_PIN         GPIO_PIN_13

// 辅助电源检测
#define AUX_PADET_PORT   GPIOG
#define AUX_PADET_PIN    GPIO_PIN_1    // A枪
#define AUX_PBDT_PORT    GPIOB
#define AUX_PBDT_PIN     GPIO_PIN_10   // B枪

// 连接确认输入
#define CHECKOUTA1_PORT  GPIOF
#define CHECKOUTA1_PIN   GPIO_PIN_10
#define CHECKOUTA2_PORT  GPIOF
#define CHECKOUTA2_PIN   GPIO_PIN_9
#define CHECKOUTB1_PORT  GPIOD
#define CHECKOUTB1_PIN   GPIO_PIN_3
#define CHECKOUTB2_PORT  GPIOA
#define CHECKOUTB2_PIN   GPIO_PIN_15

//4G模块
#define PWR_4G_PORT  GPIOF
#define PWR_4G_PIN   GPIO_PIN_3
#define RST_4G_PORT  GPIOC
#define RST_4G_PIN   GPIO_PIN_13
/* ==================== 输入读取宏 ==================== */
#define DI_READ(port, pin)       (gpio_input_bit_get(port, pin))

#endif /* __PIN_DEF_H */

void v_outpin_config(void);
void v_inpin_config(void);
void v_4g_config(void);
void v_temp_config(void);
#endif