1644 lines
58 KiB
C
1644 lines
58 KiB
C
#if !defined(_PROTOCOL_DATA_DEF_H_)
|
||
#define _PROTOCOL_DATA_DEF_H_
|
||
|
||
#include <stdio.h>
|
||
#include <stdlib.h>
|
||
#include <string.h>
|
||
|
||
#include "infra_types.h"
|
||
#include "infra_defs.h"
|
||
|
||
/*******************************用户可配置项***************************************/
|
||
#define EVS_MAX_PORT_NUM (2) // 充电接口数量
|
||
#define EVS_MAX_INPUT_METER_NUM (1) // 直流充电桩输入电表数量
|
||
#define EVS_MAX_ALARM_LEN (255) // 最大故障告警数
|
||
#define EVS_MAX_DATA_LEN (128) // 响应数据区域长度
|
||
/*********************************************************************************/
|
||
#define EVS_MAX_SEG_LEN (96) // 最大功率调节时段数
|
||
#define EVS_MAX_TRADE_LEN (40 + 1) // 最大订单号长度：设备唯一标识（充电桩资产码：24位）+充电接口标识（2 位）+ 序列号(12 位)
|
||
#define EVS_MAX_CAR_VIN_LEN (17 + 1) // 最大车辆唯一识别码长度
|
||
#define EVS_MAX_MAC_ADDR_LEN (32 + 1) // 设备mac地址长度
|
||
#define EVS_MAX_MODEL_ID_LEN (16 + 1) // 最大计费模型id长度
|
||
#define EVS_MAX_QRCODE_LEN (256) // 二维码长度
|
||
#define EVS_MAX_ICCID_LEN (24) // sim卡iccid长度
|
||
#define EVS_MAX_PILE_TYPE_LEN (20) // 桩类型长度
|
||
#define EVS_MAX_DEV_SN_LEN (16 + 1) // 厂商出厂编码
|
||
#define EVS_MAX_MODEL_DEVSEG (96) // 最大计费模型时段数
|
||
#define EVS_MAX_METER_ADDR_LEN (6) // 电表地址长度
|
||
#define EVS_MAX_METER_ASSET_LEN (32 + 1) // 电表资产码长度
|
||
#define EVS_MAX_TIMESTAMP_LEN (15 + 1) // 时间戳长度
|
||
#define EVS_MAX_SOFTWAREVER_LEN (255 + 1) // 充电桩软件版本号长度
|
||
#define EVS_MAX_HARDWAREVER_LEN (255 + 1) // 充电桩硬件版本号长度
|
||
#define EVS_MAX_SDKVER_LEN (255 + 1) // SDK版本号长度
|
||
#define EVS_MAX_LOGQUERY_LEN (38 + 1) // 查询日志流水号长度
|
||
#define EVS_MAX_LOGAREA_LEN (255 + 1) // 日志响应数据最大长度
|
||
#define EVS_MAX_CARD_LEN (20 + 1) // 卡片序列号长度
|
||
#define EVS_MAX_PSYCARD_LEN (16 + 1) // 物理卡号长度
|
||
#define EVS_MAX_RANDDOM_LEN (8 + 1) // 随机数长度
|
||
#define EVS_MAX_TRADE_MAC_LEN (8 + 1) // 交易验证码长度
|
||
#define EVS_MAX_AUTHCODE_LEN (255 + 1) // 本地鉴权鉴权码长度
|
||
#define EVS_MAX_NETMDUINFO_LEN (64 + 1) // 网络模块型号长度
|
||
#define EVS_MAX_MDUINT_NUM (10) // 模块int型数组长度
|
||
#define EVS_MAX_MDUSTRING_NUM (10) // 模块string型数组长度
|
||
#define EVS_MAX_MDUSTRING_LEN (255 + 1) // 模块string长度
|
||
#define EVS_MAX_FUNCONF_LEN (255 + 1) // 功能配置参数最大长度
|
||
#define EVS_MAX_TERMINAL_SN_LEN (12 + 1) // 终端机编号最大长度
|
||
#define EVS_MAX_TIME_STRING_LEN (14 + 1) // 鉴权时间戳最大长度
|
||
#define EVS_MAX_TRADE_MAC2_LEN (8 + 1) // 加密机鉴权码最大长度
|
||
#define EVS_MAX_DEVINFO_LEN (64 + 1) // 设备信息长度
|
||
|
||
#define EVS_MAX_BLE_SECRETKEY_LEN (24 + 1) // 蓝牙密钥最大长度
|
||
#define EVS_MAX_BLE_MAC_NUM (10 + 1) // 蓝牙MAC最大数量
|
||
#define EVS_MAX_BLE_MACLIST_LEN (64 + 1) // 蓝牙鉴权信息最大长度
|
||
#define EVS_MAX_BLE_MAC_LEN (12 + 1) // 蓝牙MAC最大长度
|
||
#define EVS_MAX_VIN_LIST_LEN (100) // 白名单最大VIN条数
|
||
#define EVS_MAX_VIN_SN_LEN (38 + 1) // 查询日志流水号长度
|
||
#define EVS_MAX_OPT_SN_LEN (39 + 1) // 功能配置更新操作流水号长度
|
||
#define EVS_MAX_PARTS_SWITCH_NUM 10 // 部件开关最大数量
|
||
#define EVS_MAX_NET_SIG_QUA_LEN (255 + 1) // 网络信号质量最大长度
|
||
#define EVS_MAX_SAMPLE_VAL_LEN (255 + 1) // 设备运行采样数据最大长度
|
||
|
||
typedef struct
|
||
{
|
||
char product_key[IOTX_PRODUCT_KEY_LEN + 1]; // 设备品类标识字符串
|
||
char product_secret[IOTX_PRODUCT_SECRET_LEN + 1]; // 设备品类密钥
|
||
char device_name[IOTX_DEVICE_NAME_LEN + 1]; // 某台设备的标识字符串:未注册前为设备出厂编号（16位长度），注册后为设备在物联管理平台的资产码（24位长度）
|
||
char device_secret[IOTX_DEVICE_SECRET_LEN + 1]; // 某台设备的设备密钥
|
||
char device_reg_code[IOTX_DEVICE_REG_CODE_LEN + 1]; // 某台设备的设备注册码
|
||
char device_uid[IOTX_DEVICE_UID_LEN + 1]; // 某台设备的出厂编号
|
||
} evs_device_meta;
|
||
|
||
typedef enum
|
||
{
|
||
EVS_CMD_READER_INIT = 0, // 读卡器初始化
|
||
EVS_CMD_READER_CHECK, // 读卡器状态检查
|
||
EVS_CMD_OPEN_RF, // 打开射频
|
||
EVS_CMD_FOUND_CARD, // 卡片激活
|
||
EVS_CMD_GET_USER_ID, // 获取卡片序列号
|
||
EVS_CMD_GET_PSY_ID, // 获取卡片物理卡号
|
||
EVS_CMD_CHECK_PIN, // 卡密验证
|
||
EVS_CMD_GET_KEY_VER, // 获取卡片密钥版本
|
||
EVS_CMD_GET_CARD_AUTH, // 获取卡片鉴权信息
|
||
EVS_CMD_CONFIRM_AUTHCODE_S, // 确认平台鉴权信息
|
||
EVS_CMD_CLOSE_RF, // 关闭射频
|
||
} evs_cmd_card_enum;
|
||
|
||
typedef enum
|
||
{
|
||
EVS_CMD_EVENT_FIRMWARE_INFO = 0,
|
||
EVS_CMD_EVENT_ASK_FEEMODEL,
|
||
EVS_CMD_EVENT_STARTCHARGE,
|
||
EVS_CMD_EVENT_STARTRESULT,
|
||
EVS_CMD_EVENT_STOPCHARGE,
|
||
EVS_CMD_EVENT_TRADEINFO,
|
||
EVS_CMD_EVENT_ALARM,
|
||
EVS_CMD_EVENT_ACPILE_CHANGE,
|
||
EVS_CMD_EVENT_DCPILE_CHANGE,
|
||
EVS_CMD_EVENT_GROUNDLOCK_CHANGE,
|
||
EVS_CMD_EVENT_GATELOCK_CHANGE,
|
||
EVS_CMD_EVENT_ASK_DEV_CONFIG,
|
||
EVS_CMD_EVENT_CAR_INFO,
|
||
EVS_CMD_EVENT_VER_INFO,
|
||
EVS_CMD_EVENT_LOGQUERY_RESULT,
|
||
EVS_CMD_EVENT_CARD_INFO,
|
||
EVS_CMD_EVENT_CARD_AUTH,
|
||
EVS_CMD_EVENT_CARD_AUTH_RESULT,
|
||
EVS_CMD_EVENT_CARD_CHECK_ERROR,
|
||
EVS_CMD_EVENT_DEVMDU_INFO,
|
||
EVS_CMD_EVENT_CHARGE_CONNECT,
|
||
EVS_CMD_EVENT_BLE_PLUG_CHARGE_INFO,
|
||
EVS_CMD_EVENT_BLE_CONN_CHANGE,
|
||
|
||
EVS_CMD_EVENT_VIN_CHECK_RESULT,
|
||
EVS_CMD_EVENT_PILE_PARTS_CCU_INFO,
|
||
EVS_CMD_EVENT_PILE_PARTS_PCU_INFO,
|
||
EVS_CMD_EVENT_PILE_PARTS_CU_INFO,
|
||
EVS_CMD_EVENT_PILE_PARTS_SWITCH_INFO,
|
||
EVS_CMD_EVENT_PILE_PARTS_EDAS_INFO,
|
||
EVS_CMD_EVENT_PILE_PARTS_CU_WORK_INFO,
|
||
EVS_CMD_EVENT_RAW_DATA,
|
||
EVS_CMD_EVENT_DEV_MAINTAIN_RESULT,
|
||
EVS_CMD_EVENT_LOCK_CTRL_RESULT,
|
||
EVS_CMD_EVENT_TIME_SYNC_RESULT,
|
||
|
||
} evs_cmd_event_enum;
|
||
|
||
typedef enum
|
||
{
|
||
EVS_CMD_PROPERTY_DCPILE = 0,
|
||
EVS_CMD_PROPERTY_ACPILE,
|
||
EVS_CMD_PROPERTY_AC_WORK,
|
||
EVS_CMD_PROPERTY_AC_NONWORK,
|
||
EVS_CMD_PROPERTY_DC_WORK,
|
||
EVS_CMD_PROPERTY_DC_NONWORK,
|
||
EVS_CMD_PROPERTY_DC_OUTMETER,
|
||
EVS_CMD_PROPERTY_AC_OUTMETER,
|
||
EVS_CMD_PROPERTY_BMS,
|
||
EVS_CMD_PROPERTY_DC_INPUT_METER,
|
||
} evs_cmd_property_enum;
|
||
|
||
// 固件信息上报事件参数
|
||
|
||
typedef struct
|
||
{
|
||
char simNo[EVS_MAX_ICCID_LEN]; // 1 SIM卡号
|
||
char feeModelId[EVS_MAX_MODEL_ID_LEN]; // 2 电费计费模型编号
|
||
char stakeModel[EVS_MAX_PILE_TYPE_LEN]; // 3 充电桩型号
|
||
unsigned int vendorCode; // 4 生产厂商编码
|
||
char devSn[EVS_MAX_DEV_SN_LEN]; // 5 出厂编号//字符串
|
||
unsigned char devType; // 6 桩类型
|
||
unsigned char portNum; // 7 充电接口数量
|
||
char simMac[EVS_MAX_MAC_ADDR_LEN]; // 8 网络MAC地址//字符串
|
||
unsigned int longitude; // 9 经度
|
||
unsigned int latitude; // 10 纬度
|
||
unsigned int height; // 11 高度
|
||
unsigned int gridType; // 12 坐标类型
|
||
char btMac[EVS_MAX_MAC_ADDR_LEN]; // 13 蓝牙MAC地址
|
||
unsigned char meaType; // 14 计量方式
|
||
unsigned int otRate; // 15 额定功率
|
||
unsigned int otMinVol; // 16 输出最小电压
|
||
unsigned int otMinCur; // 17 输出最大电流
|
||
unsigned int otMaxVol; // 18 输出最大电压
|
||
unsigned int otMaxCur; // 19 输出最大电流
|
||
char inMeter[EVS_MAX_INPUT_METER_NUM][EVS_MAX_METER_ADDR_LEN]; // 20 交流输入电表地址//压缩BCD
|
||
char outMeter[EVS_MAX_PORT_NUM][EVS_MAX_METER_ADDR_LEN]; // 21 计量用电能表地址//压缩BCD
|
||
unsigned int CT; // 22 电流互感器系数 默认值1
|
||
unsigned char isGateLock; // 23 是否有智能门锁
|
||
unsigned char isGroundLock; // 24 是否有地锁
|
||
unsigned char mutliChargingMode; // 25 是否支持多时段类型计费模型
|
||
} evs_event_firmware_info;
|
||
|
||
// 即插即充智能卡信息
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char cardSn[EVS_MAX_CARD_LEN]; // 2 智能卡序列号
|
||
char cardPsySn[EVS_MAX_PSYCARD_LEN]; // 3 智能卡物理卡号
|
||
unsigned char startMode; // 4 充电模式
|
||
} evs_event_card_info;
|
||
|
||
// 即插即充智能卡鉴权信息
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char randomC[EVS_MAX_RANDDOM_LEN]; // 2 智能卡随机数
|
||
char cardBalance[8 + 1]; // 3 智能卡余额
|
||
char cardTradeSn[4 + 1]; // 4 智能卡联机交易序号
|
||
char keyVer[3]; // 5 秘钥版本
|
||
char keyFlag[3]; // 6 密钥标识
|
||
char tradeMac1[EVS_MAX_TRADE_MAC_LEN]; // 7 鉴权码
|
||
} evs_event_card_auth;
|
||
|
||
// 即插即充智能卡鉴权结果信息
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
char tradeTac[EVS_MAX_TRADE_MAC_LEN]; // 4 鉴权确认码
|
||
} evs_event_card_auth_result;
|
||
|
||
// 设备版本信息
|
||
typedef struct
|
||
{
|
||
unsigned char devRegMethod; // 1 设备注册方式
|
||
char pileSoftwareVer[EVS_MAX_SOFTWAREVER_LEN]; // 2 充电桩软件版本号
|
||
char pileHardwareVer[EVS_MAX_HARDWAREVER_LEN]; // 3 充电桩硬件版本号
|
||
char sdkVer[EVS_MAX_SDKVER_LEN]; // 4 SDK版本号
|
||
} evs_event_ver_info;
|
||
|
||
// 设备配置数据
|
||
typedef struct
|
||
{
|
||
unsigned int equipParamFreq; // 1 充电设备实时监测属性上报频率
|
||
unsigned int gunElecFreq; // 2 充电枪充电中实时监测属性上报频率
|
||
unsigned int nonElecFreq; // 3 充电枪非充电中实时监测属性上报频率
|
||
unsigned int faultWarnings; // 4 故障告警全信息上传频率
|
||
unsigned int acMeterFreq; // 5 充电设备交流电表底值监测属性上报频率
|
||
unsigned int dcMeterFreq; // 6 直流输出电表底值监测属性上报频率
|
||
unsigned int offlinChaLen; // 7 离线后可充电时长
|
||
unsigned int grndLock; // 8 地锁监测上送频率
|
||
unsigned int doorLock; // 9 网门锁监测上送频率
|
||
char qrCode[EVS_MAX_PORT_NUM][EVS_MAX_QRCODE_LEN]; // 10 二维码数据
|
||
unsigned int s2CloseTime; // 11 交流启动S2闭合超时
|
||
unsigned int s2OpenTime; // 12 交流充电中S2长时间断开超时
|
||
} evs_data_dev_config;
|
||
|
||
// 设备日志查询服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 枪号 gunNo
|
||
unsigned int startDate; // 查询起始时间戳 startDate
|
||
unsigned int stopDate; // 查询终止时间戳 stopDate
|
||
unsigned char askType; // 查询类型 askType
|
||
char logQueryNo[EVS_MAX_LOGQUERY_LEN]; // 查询流水号
|
||
} evs_service_query_log;
|
||
|
||
// 日志查询服务回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 枪号
|
||
unsigned int startDate; // 2 查询起始时间
|
||
unsigned int stopDate; // 3 查询终止时间
|
||
unsigned char askType; // 4 查询类型
|
||
unsigned char result; // 5 响应结果
|
||
char logQueryNo[EVS_MAX_LOGQUERY_LEN]; // 6 查询流水号
|
||
} evs_service_feedback_query_log;
|
||
|
||
// 设备维护指令服务下发参数
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 枪号
|
||
unsigned char ctrlType; // 2 控制类型
|
||
} evs_service_dev_maintain;
|
||
|
||
// 设备维护状态查询服务回复参数
|
||
typedef struct
|
||
{
|
||
unsigned char ctrlType; // 1 当前类型
|
||
unsigned char result; // 2 查询结果
|
||
} evs_service_feedback_maintain_query;
|
||
|
||
// 充电枪电子锁控制服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char lockParam; // 2 控制
|
||
} evs_service_lockCtrl;
|
||
|
||
// 计费模型请求事件
|
||
|
||
typedef struct
|
||
{
|
||
char feeModelId[EVS_MAX_MODEL_ID_LEN]; // 1 计费模型编号
|
||
} evs_event_ask_feeModel;
|
||
|
||
// 计费模型更新服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
char feeModelId[EVS_MAX_MODEL_ID_LEN]; // 1 电费计费模型编号
|
||
unsigned char timeNum; // 2 电费模型时段数N 取值范围：1—96
|
||
char timeSeg[EVS_MAX_MODEL_DEVSEG][5]; // 3 电费模型时段开始时间点
|
||
unsigned int chargeFee[EVS_MAX_MODEL_DEVSEG]; // 4 电费模型
|
||
unsigned int serviceFee[EVS_MAX_MODEL_DEVSEG]; // 5 服务费费模型
|
||
} evs_service_issue_feeModel;
|
||
|
||
// 计费模型更新结果设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
char feeModelId[EVS_MAX_MODEL_ID_LEN]; // 1 电费计费模型编号
|
||
unsigned char result; // 2 失败原因
|
||
} evs_service_feedback_feeModel;
|
||
|
||
// 远程启动充电服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
unsigned char startType; // 4 启动方式
|
||
unsigned char chargeMode; // 5 充电模式
|
||
unsigned int limitData; // 6 限制值
|
||
unsigned int stopCode; // 7 停机码
|
||
unsigned char startMode; // 8 启动模式
|
||
unsigned int insertGunTime; // 10 插枪事件时间戳
|
||
} evs_service_startCharge;
|
||
|
||
// 启动充电服务设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
} evs_service_feedback_startCharge;
|
||
|
||
// 启动充电结果事件参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
unsigned char startResult; // 4 启动结果
|
||
unsigned int faultCode; // 5 故障代码
|
||
char vinCode[EVS_MAX_CAR_VIN_LEN]; // 6 vin码
|
||
} evs_event_startResult;
|
||
|
||
// 启动充电鉴权事件参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
unsigned char startType; // 4 启动方式
|
||
char authCode[EVS_MAX_CAR_VIN_LEN]; // 5 鉴权码 若启动方式为反向扫码，填入二维码信息；若为即插即充则为VIN码。
|
||
unsigned char batterySOC; // 6 电池SOC
|
||
unsigned int batteryCap; // 7 电车容量
|
||
unsigned int chargeTimes; // 8 已充电次数
|
||
unsigned int batteryVol; // 9 当前电池电压
|
||
} evs_event_startCharge;
|
||
|
||
// 鉴权充电服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
unsigned char startType; // 4 启动方式
|
||
char authCode[EVS_MAX_AUTHCODE_LEN]; // 5 鉴权码
|
||
unsigned char result; // 6 鉴权结果
|
||
unsigned char chargeMode; // 7 充电模式
|
||
unsigned int limitData; // 8 限制值
|
||
unsigned int stopCode; // 9 停机码
|
||
unsigned char startMode; // 10 启动模式
|
||
unsigned int insertGunTime; // 11 插枪事件时间戳
|
||
} evs_service_authCharge;
|
||
|
||
// 鉴权启动充电服务设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
} evs_service_feedback_authCharge;
|
||
|
||
// 远程停止充电服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
unsigned char stopReason; // 4 停止原因
|
||
} evs_service_stopCharge;
|
||
|
||
// 远程停止充电服务设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
} evs_service_feedback_stopCharge;
|
||
|
||
// 设备部件配置参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char optSn[EVS_MAX_OPT_SN_LEN]; // 2 平台操作序号
|
||
unsigned int funCode; // 3 功能代码
|
||
unsigned int confInt; // 4 参数信息
|
||
char confString[EVS_MAX_FUNCONF_LEN]; // 5 字符信息
|
||
// unsigned int powerAlloc; // 3 功率动态分配策略
|
||
// char partsType; // 4 组件类型
|
||
// char sendMode; // 5 上送方式
|
||
// char ccuPeriod; // 6 控制器上送周期
|
||
// char tcuPeriod; // 7 tcu上送周期
|
||
} evs_service_config_parts;
|
||
|
||
typedef struct
|
||
{
|
||
unsigned int resCode; // 1 结果
|
||
char optSn[EVS_MAX_OPT_SN_LEN]; // 2 平台操作序号
|
||
unsigned int funCode; // 3 功能代码
|
||
} evs_service_feedback_config_parts;
|
||
|
||
// 设备部件配置参数查询
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char partsType; // 2 部件类型
|
||
unsigned int funCode; // 3 功能代码
|
||
} evs_service_parts_config_get;
|
||
|
||
// 设备部件配置结果
|
||
|
||
typedef struct
|
||
{
|
||
unsigned int result; // 1 结果
|
||
unsigned int confInt; // 2 配置参数信息
|
||
char confString[EVS_MAX_FUNCONF_LEN]; // 3 配置字符信息
|
||
} evs_service_feedback_config_parts_get;
|
||
|
||
// 交易记录召测服务
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char askType; // 2 召测类型
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 3 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 4 设备交易流水号
|
||
char startDate[EVS_MAX_TIMESTAMP_LEN]; // 5 查询起始时间
|
||
char stopDate[EVS_MAX_TIMESTAMP_LEN]; // 6 查询结束时间
|
||
} evs_service_trade_get;
|
||
|
||
// 交易记录召测结果
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char askType; // 2 召测类型
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 3 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 4 设备交易流水号
|
||
char startDate[EVS_MAX_TIMESTAMP_LEN]; // 5 查询起始时间
|
||
char stopDate[EVS_MAX_TIMESTAMP_LEN]; // 6 查询结束时间
|
||
unsigned char askResult; // 7 查询结果
|
||
unsigned int tradeCnt; // 8 上报条数
|
||
} evs_service_feedback_trade_get;
|
||
|
||
// 电表底值召测服务
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char askType; // 2 召测类型
|
||
char askDate[EVS_MAX_TIMESTAMP_LEN]; // 3 查询时间
|
||
} evs_service_meter_get;
|
||
|
||
// 电表底值召测结果
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char askType; // 2 召测类型
|
||
char askDate[EVS_MAX_TIMESTAMP_LEN]; // 3 查询时间
|
||
unsigned char askResult; // 4 召测结果
|
||
} evs_service_feedback_meter_get;
|
||
|
||
// 设备维护指令结果
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char ctrlType; // 1 当前控制类型
|
||
unsigned int reason; // 2 失败原因
|
||
} evs_event_feedback_dev_maintain;
|
||
|
||
// 电子锁控制结果
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char lockStatus; // 2 电子锁状态
|
||
unsigned int resCode; // 3 结果
|
||
} evs_event_feedback_lockCtrl;
|
||
|
||
// 停止充电结果事件上传参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
unsigned char stopResult; // 4 停止结果
|
||
unsigned int resultCode; // 5 停止原因
|
||
unsigned char stopFailReson; // 6 停止失败原因
|
||
} evs_event_stopCharge;
|
||
|
||
// 交易记录事件上传参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
char vinCode[EVS_MAX_CAR_VIN_LEN]; // 4 VIN
|
||
unsigned char timeDivType; // 5 计量计费类型
|
||
unsigned char startType; // 6 启动方式
|
||
unsigned int chargeStartTime; // 7 开始充电时间
|
||
unsigned int chargeEndTime; // 8 结束充电时间
|
||
unsigned char startSoc; // 9 启动时SOC
|
||
unsigned char endSoc; // 10 停止时SOC
|
||
unsigned int reason; // 11 停止充电原因
|
||
char feeModelId[EVS_MAX_MODEL_ID_LEN]; // 12 计量计费模型编号
|
||
long long sumStart; // 13 电表总起示值
|
||
long long sumEnd; // 14 电表总止示值
|
||
unsigned int totalElect; // 15 总电量
|
||
unsigned int totalPowerCost; // 16 总电费
|
||
unsigned int totalServCost; // 17 总服务费
|
||
unsigned int totalCost; // 18 总消费金额
|
||
unsigned char timeNum; // 19 时段数
|
||
unsigned int partElect[EVS_MAX_MODEL_DEVSEG]; // 20 时段电量
|
||
unsigned int chargeFee[EVS_MAX_MODEL_DEVSEG]; // 21 时段电费
|
||
unsigned int serviceFee[EVS_MAX_MODEL_DEVSEG]; // 22 时段服务费
|
||
unsigned char startPoint; // 23 起始点标识
|
||
unsigned char crossPoints; // 24 跨越点数
|
||
unsigned int pointsElect[EVS_MAX_MODEL_DEVSEG]; // 25 跨越点电量
|
||
} evs_event_tradeInfo;
|
||
|
||
// 交易记录确认服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
unsigned char errcode; // 4 交易记录上传结果
|
||
} evs_service_confirmTrade;
|
||
|
||
// 故障告警事件上传参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 枪编号
|
||
unsigned short faultSum; // 2 故障总
|
||
unsigned short warnSum; // 3 告警总
|
||
unsigned short faultValue[EVS_MAX_ALARM_LEN]; // 4 故障点数据
|
||
unsigned short warnValue[EVS_MAX_ALARM_LEN]; // 5 告警点数据
|
||
} evs_event_alarm;
|
||
|
||
// VIN白名单更新服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char updateSN[EVS_MAX_VIN_SN_LEN]; // 1 白名单编号
|
||
unsigned char optType; // 2 操作类型
|
||
unsigned int totalVINCnt; // 3 白名单总数
|
||
unsigned int packTotalCnt; // 4 更新总包数
|
||
unsigned int packCnt; // 5 更新包序号
|
||
unsigned int packVINCnt; // 6 当前包VIN条数
|
||
char vinList[EVS_MAX_VIN_LIST_LEN][EVS_MAX_CAR_VIN_LEN]; // 7 vin列表
|
||
} evs_service_vinList_update;
|
||
|
||
// VIN白名单更新服务设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char updateSN[EVS_MAX_VIN_SN_LEN]; // 1 白名单编号
|
||
unsigned char optType; // 2 操作类型
|
||
unsigned char result; // 3 结果
|
||
} evs_service_feedback_vinList_update;
|
||
|
||
// 预约充电服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char appoMethod; // 2 预约方式
|
||
unsigned short appoDelay; // 3 预留
|
||
unsigned short appoData; // 4 预留
|
||
unsigned int startChargeTime; // 5 启动充电时间
|
||
unsigned int stopChargeTime; // 6 停止充电时间
|
||
} evs_service_rsvCharge;
|
||
|
||
// 预约充电服务设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char appoMethod; // 2 预约方式
|
||
unsigned char result; // 3 预约结果
|
||
} evs_service_feedback_rsvCharge;
|
||
|
||
// 地锁控制服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char ctrlFlag; // 2 控制指令
|
||
} evs_service_groundLock_ctrl;
|
||
|
||
// 地锁控制服务回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char result; // 2 控制结果
|
||
unsigned char reason; // 3 失败原因
|
||
} evs_service_feedback_groundLock_ctrl;
|
||
|
||
// 地锁状态变化事件上传参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char lockState; // 2 地锁状态
|
||
unsigned char powerType; // 3 供电方式
|
||
unsigned char cellState; // 4 电池状态
|
||
unsigned char lockerState; // 5 锁舌状态
|
||
unsigned char lockerForced; // 6 锁舌受外力强制动作
|
||
unsigned char lowPower; // 7 电池低电量报警
|
||
unsigned char soc; // 8 电池SOC
|
||
unsigned int openCnt; // 9 开闭次数
|
||
} evs_event_groundLock_change;
|
||
|
||
// 智能门锁控制服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char lockNo; // 1 门锁编号
|
||
unsigned char ctrlFlag; // 2 控制指令
|
||
} evs_service_gateLock_ctrl;
|
||
|
||
// 智能门锁控制服务回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char lockNo; // 1 充电枪编号
|
||
unsigned char result; // 2 控制结果
|
||
} evs_service_feedback_gateLock_ctrl;
|
||
|
||
// 智能门锁状态变化事件上传参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char lockNo; // 1 充电枪编号
|
||
unsigned char lockState; // 2 智能门锁状态
|
||
} evs_event_gateLock_change;
|
||
|
||
// 有序充电策略服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 1 订单流水号
|
||
unsigned char num; // 2 策略配置时间段数量
|
||
unsigned char validTime[EVS_MAX_SEG_LEN][5]; // 3 策略生效时间//字符串数组。时间格式采用HHMM，24小时制。例如 ：[time1,time2,time3…]。
|
||
unsigned short kw[EVS_MAX_SEG_LEN]; // 4 策略配置功率//整型数组。功率精确到0.1KW[kw1,kw2,kw3…]
|
||
|
||
} evs_service_orderCharge;
|
||
|
||
// 有序充电策略服务设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 1 订单流水号
|
||
unsigned char result; // 2 返回结果
|
||
unsigned char reason; // 3 失败原因
|
||
} evs_service_feedback_orderCharge;
|
||
|
||
// 交直流充电设备枪状态变化事件上传参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned int yxOccurTime; // 2 发生时刻
|
||
unsigned char connCheckStatus; // 3 变位点数据
|
||
} evs_event_pile_stutus_change;
|
||
|
||
// 交直流充电设备充电前车辆信息上报事件上传参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char batterySOC; // 2 电池SOC
|
||
unsigned int batteryCap; // 3 电车容量
|
||
char vinCode[EVS_MAX_CAR_VIN_LEN]; // 4 vin码
|
||
unsigned char state; // 5 获取车辆信息状态
|
||
} evs_event_car_info;
|
||
|
||
// 设备组件信息上报事件参数
|
||
|
||
typedef struct
|
||
{
|
||
char netMduInfo[EVS_MAX_NETMDUINFO_LEN]; // 1 网络模块型号
|
||
char netMduSoftVer[EVS_MAX_NETMDUINFO_LEN]; // 2 网络模块软件版本号
|
||
char netMduImei[EVS_MAX_NETMDUINFO_LEN]; // 3 网络模块IMEI
|
||
unsigned char smartGun; // 4 智能充电枪功能 10支持，11不支持
|
||
unsigned int mduInfoInt[EVS_MAX_MDUINT_NUM]; // 5 int型数组
|
||
char mduInfoString[EVS_MAX_MDUSTRING_NUM][EVS_MAX_MDUSTRING_LEN]; // 6 string型数组
|
||
} evs_event_devmdu_info;
|
||
|
||
// VIN白名单查询结果数据
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char result;
|
||
unsigned char updateSN[EVS_MAX_VIN_SN_LEN]; // 1 白名单编号
|
||
unsigned int totalVINCnt; // 3 白名单总数
|
||
unsigned int packTotalCnt; // 4 更新总包数
|
||
unsigned int packCnt; // 5 更新包序号
|
||
unsigned int packVINCnt; // 6 当前包VIN条数
|
||
char vinList[EVS_MAX_VIN_LIST_LEN][EVS_MAX_CAR_VIN_LEN]; // 7 vin列表
|
||
} evs_event_vinList_result;
|
||
|
||
// 时钟同步结果
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char srvTime[EVS_MAX_TIMESTAMP_LEN]; // 1 平台时间
|
||
unsigned char devTime[EVS_MAX_TIMESTAMP_LEN]; // 2 设备当前时间
|
||
unsigned char resCode; // 3 同步结果
|
||
} evs_event_time_sync_result;
|
||
|
||
// 设备功能配置数据
|
||
|
||
typedef struct
|
||
{
|
||
unsigned int funCode; // 1 功能代码
|
||
unsigned int confInt; // 2 参数信息
|
||
char confString[EVS_MAX_FUNCONF_LEN]; // 3 字符信息
|
||
char optSn[EVS_MAX_OPT_SN_LEN]; // 4 操作流水号
|
||
} evs_service_dev_fun_config;
|
||
|
||
// 查询设备功能配置回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned int resCode; // 1 结果
|
||
unsigned int funCode; // 2 功能代码
|
||
char optSn[EVS_MAX_OPT_SN_LEN]; // 3 操作流水号
|
||
} evs_service_feedback_dev_fun_config;
|
||
|
||
// 查询设备功能配置
|
||
|
||
typedef struct
|
||
{
|
||
unsigned int funCode; // 1 功能代码
|
||
} evs_service_get_dev_fun_config;
|
||
|
||
// 计费模型查询服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
} evs_service_feeModel_query;
|
||
|
||
// 计费模型查询结果设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
|
||
char feeModelId[EVS_MAX_MODEL_ID_LEN]; // 1 电费模型编号
|
||
unsigned char timeNum; // 2 电费模型时段数N 取值范围：1—96
|
||
char timeSeg[EVS_MAX_MODEL_DEVSEG][5]; // 3 电费模型时段开始时间点
|
||
|
||
unsigned int chargeFee[EVS_MAX_MODEL_DEVSEG]; // 4 电费模型
|
||
unsigned int serviceFee[EVS_MAX_MODEL_DEVSEG]; // 5 服务费费模型
|
||
} evs_service_feedback_feeModel_qurey;
|
||
|
||
// 充电中连接状态变化事件参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char cpStatus; // 2 CP状态
|
||
unsigned int cpVolt; // 3 CP电压采集值
|
||
unsigned char s3Status; // 4 S3开关状态
|
||
unsigned int yxOccurTime; // 5 发生时刻
|
||
} evs_event_charge_connect_change;
|
||
|
||
// 智能卡检测异常事件参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char cardSn[EVS_MAX_CARD_LEN]; // 2 智能卡序列号
|
||
char cardPsySn[EVS_MAX_PSYCARD_LEN]; // 3 智能卡物理卡号
|
||
unsigned char faultValue; // 4 失败原因
|
||
} evs_event_card_check_error;
|
||
// 蓝牙秘钥更新服务参数
|
||
|
||
typedef struct
|
||
{
|
||
char bleSecretKey[EVS_MAX_BLE_SECRETKEY_LEN]; // 1 蓝牙秘钥
|
||
unsigned int updateTime; // 2 更新时间
|
||
} evs_service_blesecret_update;
|
||
|
||
// 蓝牙秘钥更新服务设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
char bleSecretKey[EVS_MAX_BLE_SECRETKEY_LEN]; // 1 蓝牙秘钥
|
||
unsigned char result; // 2 返回结果
|
||
} evs_service_feedback_blesecret_update;
|
||
|
||
// 蓝牙即插即充信息上报事件参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char plugChgStatus; // 1 即插即充状态
|
||
unsigned char macNum; // 2 MAC数量
|
||
char macList[EVS_MAX_BLE_MAC_NUM][EVS_MAX_BLE_MACLIST_LEN]; // 3 蓝牙列表
|
||
} evs_event_ble_plug_charge_info;
|
||
|
||
// 蓝牙即插即充信息确认服务下发参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char macNum; // 1 MAC数量
|
||
} evs_service_ble_plug_charge_info_conf;
|
||
|
||
// 蓝牙鉴权列表清除服务参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char cleanType; // 1 清除方式
|
||
char macInfo[EVS_MAX_MAC_ADDR_LEN]; // 2 蓝牙MAC
|
||
|
||
} evs_service_blelist_clean;
|
||
|
||
// 蓝牙MAC鉴权列表清除服务设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char cleanType; // 1 清除方式
|
||
unsigned char result; // 2 清除结果
|
||
} evs_service_feedback_blelist_clean;
|
||
|
||
// 蓝牙连接状态变更事件参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned int yxOccurTime; // 1 发生时刻
|
||
unsigned char connCheckStatus; // 2 变位点数据
|
||
char macInfo[EVS_MAX_BLE_MAC_LEN]; // 3 MAC信息
|
||
} evs_event_ble_conn_change;
|
||
|
||
// 蓝牙即插即充重置服务设备回复参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char result; // 1 重置结果
|
||
} evs_service_feedback_ble_reset;
|
||
|
||
/*********************************************交流业务相关************************************************************/
|
||
// 交流设备属性上报参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char netType; // 1 网络类型
|
||
unsigned char sigVal; // 2 网络信号等级
|
||
unsigned char netId; // 3 网络运营商
|
||
unsigned int acVolA; // 4 A相采集电压
|
||
unsigned int acCurA; // 5 A相采集电流
|
||
unsigned int acVolB; // 6 B相采集电压
|
||
unsigned int acCurB; // 7 B相采集电流
|
||
unsigned int acVolC; // 8 C相采集电压
|
||
unsigned int acCurC; // 9 C相采集电流
|
||
unsigned short caseTemp; // 10 桩内温度
|
||
char feeModelId[EVS_MAX_MODEL_ID_LEN]; // 11 计费模型编号
|
||
unsigned int totalRam; // 12 总内存 单位：KB
|
||
unsigned char ramUseRate; // 13 内存使用率
|
||
unsigned int totalRom; // 14 总硬盘空间 单位：KB
|
||
unsigned char romUseRate; // 15 硬盘使用率
|
||
unsigned char cpuUseRate; // 16 CPU使用率
|
||
char netSigQua[EVS_MAX_NET_SIG_QUA_LEN]; // 17 网络信号质量
|
||
char devRunSampVal[EVS_MAX_SAMPLE_VAL_LEN]; // 18 设备运行采样数据
|
||
} evs_property_acPile;
|
||
|
||
// 交流充电枪充电中实时监测属性
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char workStatus; // 3 工作状态
|
||
unsigned char conStatus; // 4 连接确认开关状态
|
||
unsigned char outRelayStatus; // 5 输出继电器状态
|
||
unsigned char eLockStatus; // 6 充电接口电子锁状态
|
||
unsigned short gunTemp; // 7 充电枪头温度
|
||
unsigned int acVolA; // 8 充电设备A相输出电压
|
||
unsigned int acCurA; // 9 充电设备A相输出电流
|
||
unsigned int acVolB; // 10 充电设备B相输出电压
|
||
unsigned int acCurB; // 11 充电设备B相输出电流
|
||
unsigned int acVolC; // 12 充电设备C相输出电压
|
||
unsigned int acCurC; // 13 充电设备C相输出电流
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 14 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 15 设备交易流水号
|
||
unsigned int realPower; // 16 充电实际功率
|
||
unsigned int chgTime; // 17 累计充电时间
|
||
unsigned int PwmDutyRadio; // 18 PWM占空比
|
||
|
||
unsigned int s2SwhActNum; // 19 S2开关动作次数
|
||
long long meterStartVal; // 20 表底值起始值
|
||
long long meterRealVal; // 21 表底值当前值
|
||
|
||
unsigned int totalElect; // 22 总电量
|
||
unsigned int totalCost; // 23 总金额
|
||
unsigned int totalPowerCost; // 24 总电费
|
||
unsigned int totalServCost; // 25 总服务费
|
||
|
||
unsigned char timeNum; // 26 时段数
|
||
unsigned int partElect[EVS_MAX_MODEL_DEVSEG]; // 27 时段电量
|
||
unsigned int chargeFee[EVS_MAX_MODEL_DEVSEG]; // 28 时段电费
|
||
unsigned int serviceFee[EVS_MAX_MODEL_DEVSEG]; // 29 时段服务费
|
||
|
||
unsigned char startPoint; // 30 起始点标识
|
||
unsigned char crossPoints; // 31 跨越点数
|
||
unsigned int pointsElect[EVS_MAX_MODEL_DEVSEG]; // 32 跨越点电量
|
||
|
||
} evs_property_ac_work;
|
||
|
||
// 交流充电枪非充电中实时监测属性
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char workStatus; // 3 工作状态
|
||
unsigned char conStatus; // 4 连接确认开关状态
|
||
unsigned char outRelayStatus; // 5 输出继电器状态
|
||
unsigned char eLockStatus; // 6 充电接口电子锁状态
|
||
unsigned short gunTemp; // 7 充电枪头温度
|
||
unsigned int acVolA; // 8 充电设备A相输出电压
|
||
unsigned int acCurA; // 9 充电设备A相输出电流
|
||
unsigned int acVolB; // 10 充电设备B相输出电压
|
||
unsigned int acCurB; // 11 充电设备B相输出电流
|
||
unsigned int acVolC; // 12 充电设备C相输出电压
|
||
unsigned int acCurC; // 13 充电设备C相输出电流
|
||
long long sumMeter; // 14 电表底值
|
||
} evs_property_ac_nonWork;
|
||
|
||
/*********************************************直流业务相关************************************************************/
|
||
|
||
// 直流设备属性上报参数
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char netType; // 1 网络类型
|
||
unsigned char sigVal; // 2 网络信号等级
|
||
unsigned char netId; // 3 网络运营商
|
||
unsigned int acVolA; // 4 A相采集电压
|
||
unsigned int acCurA; // 5 A相采集电流
|
||
unsigned int acVolB; // 6 B相采集电压
|
||
unsigned int acCurB; // 7 B相采集电流
|
||
unsigned int acVolC; // 8 C相采集电压
|
||
unsigned int acCurC; // 9 C相采集电流
|
||
unsigned char caseHumidity; // 10 设备内湿度
|
||
unsigned short caseTemp; // 11 设备内温度
|
||
unsigned short inletTemp; // 12 设备入风口温度
|
||
unsigned short outletTemp; // 13 设备出风口温度
|
||
char feeModelId[EVS_MAX_MODEL_ID_LEN]; // 14 计费模型编号
|
||
unsigned int totalRam; // 15 总内存
|
||
unsigned char ramUseRate; // 16 内存使用率
|
||
unsigned int totalRom; // 17 总硬盘空间
|
||
unsigned char romUseRate; // 18 磁盘使用率
|
||
unsigned char cpuUseRate; // 19 cpu使用率
|
||
unsigned int sysStartTime; // 20 系统启动时间
|
||
unsigned int sysWorkTime; // 21 系统累计运行时间
|
||
} evs_property_dcPile;
|
||
|
||
// 直流充电枪BMS监测属性
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 2 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
unsigned char socVal; // 4 SOC
|
||
unsigned char BMSVer; // 5 BMS通信协议版本号
|
||
unsigned short BMSMaxVol; // 6 最高允许充电总电压
|
||
unsigned char batType; // 7 电池类型
|
||
unsigned short batRatedCap; // 8 整车动力蓄电池额定容量
|
||
unsigned short batRatedTotalVol; // 9 整车动力蓄电池额定总电压
|
||
unsigned short singlBatMaxAllowVol; // 10 单体动力蓄电池最高允许充电电压
|
||
unsigned short maxAllowCur; // 11 最高允许充电电流
|
||
unsigned short battotalEnergy; // 12 整车动力蓄电池标称总能量
|
||
unsigned short maxVol; // 13 最高允许充电总电压
|
||
unsigned short maxTemp; // 14 最高允许温度
|
||
unsigned short batCurVol; // 15 整车动力蓄电池当前电池电压
|
||
char batManufacturer[11]; // 16 电池组厂商
|
||
char batSN[4]; // 17 电池组序号
|
||
char batMadeDay[9]; // 18 电池组生产日期
|
||
unsigned int chargeTimes; // 19 电池组充电次数
|
||
unsigned char batProperty; // 20 电池产权
|
||
char bmsSoftVer[11]; // 21 BMS软件版本号
|
||
} evs_property_BMS;
|
||
|
||
// 直流充电枪充电中实时监测属性
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char workStatus; // 2 工作状态
|
||
unsigned char gunStatus; // 3 充电枪连接状态
|
||
unsigned char eLockStatus; // 4 充电枪电子锁状态
|
||
unsigned char DCK1Status; // 5 直流输出接触器K1状态
|
||
unsigned char DCK2Status; // 6 直流输出接触器K2状态
|
||
unsigned char DCPlusFuseStatus; // 7 DC+熔断器状态
|
||
unsigned char DCMinusFuseStatus; // 8 DC-熔断器状态
|
||
unsigned short conTemp1; // 9 充电接口DC+温度
|
||
unsigned short conTemp2; // 10 充电接口DC-温度
|
||
unsigned int dcVol; // 11 输出电压
|
||
unsigned int dcCur; // 12 输出电流
|
||
char preTradeNo[EVS_MAX_TRADE_LEN]; // 13 平台交易流水号
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 14 设备交易流水号
|
||
unsigned char chgType; // 15 充电类型
|
||
unsigned int realPower; // 16 充电设备输出功率
|
||
unsigned int chgTime; // 17 累计充电时间
|
||
unsigned short remainT; // 18 估算充满剩余充电时间
|
||
unsigned char socVal; // 19 SOC
|
||
unsigned short needVol; // 20 充电需求电压
|
||
unsigned short needCur; // 21 充电需求电流
|
||
unsigned char chargeMode; // 22 充电模式
|
||
unsigned short bmsVol; // 23 BMS充电电压测量值
|
||
unsigned short bmsCur; // 24 BMS充电电流测量值
|
||
unsigned short SingleMHV; // 25 最高单体动力蓄电池电压
|
||
unsigned short SingleMLV; // 26 最高单体动力蓄电池电压
|
||
unsigned short MHTemp; // 27 最高动力蓄电池温度
|
||
unsigned short MLTemp; // 28 最低动力蓄电池温度
|
||
unsigned int SingleMHVNo; // 29 最高单体动力蓄电池电压所在编号
|
||
unsigned int MHTempNo; // 30 最高动力蓄电池温度检测点编号
|
||
unsigned int MLTempNo; // 31 最低动力蓄电池温度检测点编号
|
||
unsigned short guidanceVol; // 32 控制导引电压
|
||
unsigned char acInputContactorState; // 33 交流输入接触器状态
|
||
unsigned char acInputContactorCtrlState; // 34 交流输入接触器控制状态
|
||
unsigned char k1CtrlState; // 35 直流接触器K1控制状态
|
||
unsigned char k2CtrlState; // 36 直流接触器K2控制状态
|
||
unsigned char apsSwtichCtrlState; // 37 交流输入接触器控制状态
|
||
unsigned char carbinFanCtrlState; // 38 风机开关控制状态
|
||
unsigned char elockCtrlState; // 39 电子锁控制状态
|
||
long long meterStartVal; // 40 表底值起始值
|
||
long long meterRealVal; // 41 表底值当前值
|
||
unsigned int totalElect; // 42 总电量
|
||
unsigned int totalCost; // 43 总金额
|
||
unsigned int totalPowerCost; // 44 总电费
|
||
unsigned int totalServCost; // 45 总服务费
|
||
unsigned char timeNum; // 46 时段数
|
||
unsigned int partElect[EVS_MAX_MODEL_DEVSEG]; // 47 时段电量
|
||
unsigned int chargeFee[EVS_MAX_MODEL_DEVSEG]; // 48 时段电费
|
||
unsigned int serviceFee[EVS_MAX_MODEL_DEVSEG]; // 49 时段服务费
|
||
unsigned char startPoint; // 50 起始点标识
|
||
unsigned char crossPoints; // 51 跨越点数
|
||
unsigned int pointsElect[EVS_MAX_MODEL_DEVSEG]; // 52 跨越点电量
|
||
|
||
} evs_property_dc_work;
|
||
|
||
// 直流充电枪非充电中实时监测属性
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned char workStatus; // 2 工作状态
|
||
unsigned char gunStatus; // 3 充电枪连接状态
|
||
unsigned char eLockStatus; // 4 充电枪电子锁状态
|
||
unsigned char DCK1Status; // 5 直流输出接触器K1状态
|
||
unsigned char DCK2Status; // 6 直流输出接触器K2状态
|
||
unsigned char DCPlusFuseStatus; // 7 DC+熔断器状态
|
||
unsigned char DCMinusFuseStatus; // 8 DC-熔断器状态
|
||
unsigned short conTemp1; // 9 充电接口DC+温度
|
||
unsigned short conTemp2; // 10 充电接口DC-温度
|
||
unsigned int dcVol; // 11 输出电压
|
||
unsigned int dcCur; // 12 输出电流
|
||
unsigned int chargeCnt; // 13 充电枪总充电次数
|
||
unsigned int chargeTime; // 14 充电枪总充电时长
|
||
unsigned int k1Cnt; // 15 K1总动作次数
|
||
unsigned int k2Cnt; // 16 K2总动作次数
|
||
unsigned char acContactorState; // 17 交流输入接触器状态
|
||
unsigned char guidanceVal; // 18 控制导引电压
|
||
unsigned char auxiliaryPowerStatus; // 19 辅助电源开关控制状态
|
||
unsigned char elockCtrlState; // 20 电子锁控制状态
|
||
unsigned char fanSwitchCtrlStatus; // 21 风机开关控制状态
|
||
long long sumMeter; // 22 电表底值
|
||
|
||
} evs_property_dc_nonWork;
|
||
|
||
// 直流输入电表底值监测属性
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 充电枪编号
|
||
char acqTime[EVS_MAX_TIMESTAMP_LEN]; // 采集时间
|
||
unsigned char mailAddr[EVS_MAX_METER_ADDR_LEN]; // 通信地址 压缩BCD
|
||
unsigned char meterNo[EVS_MAX_METER_ADDR_LEN]; // 电表表号 压缩BCD
|
||
char assetId[EVS_MAX_METER_ASSET_LEN]; // 电表资产编码
|
||
long long sumMeter; // 电表底值
|
||
unsigned int ApElect; // A相正向总电量
|
||
unsigned int BpElect; // B相正向总电量
|
||
unsigned int CpElect; // C相正向总电量
|
||
} evs_property_dc_input_meter;
|
||
|
||
/******************************************公共属性区*************************************************/
|
||
|
||
// 交直流输出电表底值监测属性
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
char acqTime[EVS_MAX_TIMESTAMP_LEN]; // 2 采集时间
|
||
unsigned char mailAddr[EVS_MAX_METER_ADDR_LEN]; // 3 通信地址 压缩BCD
|
||
unsigned char meterNo[EVS_MAX_METER_ADDR_LEN]; // 4 表号 压缩BCD
|
||
char assetId[EVS_MAX_METER_ASSET_LEN]; // 5 电表资产编码
|
||
long long sumMeter; // 6 电表底值
|
||
char lastTrade[EVS_MAX_TRADE_LEN]; // 7 最后交易流水
|
||
unsigned int elec; // 8 充电中订单的已充电量
|
||
} evs_property_meter;
|
||
|
||
// 设备日志查询结果上报事件
|
||
typedef union
|
||
{
|
||
char rawData[EVS_MAX_LOGAREA_LEN];
|
||
evs_event_tradeInfo tradeInfo;
|
||
evs_property_meter meterData;
|
||
evs_property_BMS BMSData;
|
||
} u_logData;
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 充电枪编号
|
||
unsigned int startDate; // 2 查询起始时间戳 startDate
|
||
unsigned int stopDate; // 3 查询终止时间戳 stopDate
|
||
unsigned char askType; // 4 查询类型
|
||
unsigned char result; // 5 响应结果
|
||
char logQueryNo[EVS_MAX_LOGQUERY_LEN]; // 6 查询流水号
|
||
unsigned char retType; // 7 响应类型
|
||
unsigned int logQueryEvtSum; // 8 日志结果上报事件总帧数
|
||
unsigned int logQueryEvtNo; // 9 日志结果上报帧序号
|
||
u_logData dataArea; // 10 响应数据区
|
||
} evs_event_logQuery_Result;
|
||
|
||
// 充电桩部件上报事件
|
||
typedef struct
|
||
{
|
||
unsigned int partsAddr;
|
||
unsigned int residualLife;
|
||
unsigned int workTime;
|
||
unsigned int alarmTimes;
|
||
unsigned int faultTimes;
|
||
unsigned int k1Cnt;
|
||
unsigned int k2Cnt;
|
||
unsigned int reliefCircuitCnt;
|
||
unsigned int gunPlugCnt;
|
||
unsigned int gunLockCnt;
|
||
unsigned int totalChargeCnt;
|
||
unsigned int totalChargeTime;
|
||
} evs_event_ccu_info; // 充电控制器
|
||
|
||
typedef struct
|
||
{
|
||
unsigned int partsAddr;
|
||
unsigned int residualLife;
|
||
unsigned int workTime;
|
||
unsigned int alarmTimes;
|
||
unsigned int faultTimes;
|
||
} evs_event_pcu_info; // 功率控制模块
|
||
|
||
typedef struct
|
||
{
|
||
unsigned int partsAddr;
|
||
char devType[EVS_MAX_DEVINFO_LEN];
|
||
char devSN[EVS_MAX_DEVINFO_LEN];
|
||
unsigned int residualLife;
|
||
unsigned int workTime;
|
||
unsigned int alarmTimes;
|
||
unsigned int faultTimes;
|
||
|
||
unsigned int upTimes;
|
||
unsigned int pfcTemper;
|
||
unsigned int transformerTemper;
|
||
unsigned int frontFanTemper;
|
||
unsigned int backFanTemper;
|
||
unsigned int inletTemer;
|
||
unsigned int phaseVa;
|
||
unsigned int phaseVb;
|
||
unsigned int phaseVc;
|
||
unsigned int status;
|
||
unsigned int outputVol;
|
||
unsigned int outputCur;
|
||
unsigned int currentGID;
|
||
unsigned int alarm1;
|
||
unsigned int alarm2;
|
||
unsigned int alarm3;
|
||
} evs_event_cu_info; // 充电模块
|
||
|
||
typedef struct
|
||
{
|
||
unsigned int partsAddr;
|
||
unsigned int residualLife;
|
||
unsigned int workTime;
|
||
unsigned int alarmTimes;
|
||
unsigned int faultTimes;
|
||
unsigned char switchType;
|
||
unsigned char commState;
|
||
unsigned int switchAnodeState[EVS_MAX_PARTS_SWITCH_NUM];
|
||
unsigned int switchAnodeActCnt[EVS_MAX_PARTS_SWITCH_NUM];
|
||
unsigned int switchCathodeActCnt[EVS_MAX_PARTS_SWITCH_NUM];
|
||
|
||
} evs_event_switch_info; // 开关模块
|
||
|
||
typedef struct
|
||
{
|
||
unsigned int partsAddr;
|
||
unsigned int residualLife;
|
||
unsigned int workTime;
|
||
unsigned int alarmTimes;
|
||
unsigned int faultTimes;
|
||
|
||
} evs_event_edas_info; // 环境信息采集模块
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 枪编号
|
||
unsigned char sumModul; // 2 总模块数
|
||
unsigned int ratedPower; // 3 充电模块额定功率
|
||
unsigned char workModulCnt; // 4 在用充电模块总数
|
||
unsigned char faultModulCnt; // 5 故障充电模块总数
|
||
unsigned char portWorkModulCnt; // 6 当前充电端口在用充电模块总数
|
||
} evs_event_cu_work_info;
|
||
|
||
typedef struct
|
||
{
|
||
unsigned char gunNo; // 1 枪编号
|
||
unsigned char startMode; // 2 启动模式
|
||
char tradeNo[EVS_MAX_TRADE_LEN]; // 3 设备交易流水号
|
||
unsigned char gunIsReady; // 4 插枪状态 0未插枪 1已插枪
|
||
} evs_smart_gun_auth_param;
|
||
|
||
/******************************************需用户实现的回调函数*************************************************/
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_query_log() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_query_log() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform log query service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_query_log(evs_service_query_log *param, evs_service_feedback_query_log *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_devCtrl() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_devCtrl() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform device control service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_dev_maintain(evs_service_dev_maintain *param);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_lockCtrl() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_lockCtrl() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform chargeGun e-lock control service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_lockCtrl(evs_service_lockCtrl *param);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_issue_feeModel() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_issue_feeModel() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform feemodel issue service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_issue_feeModel(evs_service_issue_feeModel *param, evs_service_feedback_feeModel *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_startCharge() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_startCharge() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform remote start-charge service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_startCharge(evs_service_startCharge *param, evs_service_feedback_startCharge *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_authCharge() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_authCharge() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform authorization charge service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_authCharge(evs_service_authCharge *param, evs_service_feedback_authCharge *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_stopCharge() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_stopCharge() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform remote stop-charge service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_stopCharge(evs_service_stopCharge *param, evs_service_feedback_stopCharge *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_rsvCharge() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_rsvCharge() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform reservation charge service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_rsvCharge(evs_service_rsvCharge *param, evs_service_feedback_rsvCharge *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_confirmTrade() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_confirmTrade() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform transaction confirm service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_confirmTrade(evs_service_confirmTrade *param, void *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_grounLock_ctrl() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_grounLock_ctrl() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform smart ground locker service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_grounLock_ctrl(evs_service_groundLock_ctrl *param, evs_service_feedback_groundLock_ctrl *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_gateLock_ctrl() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_gateLock_ctrl() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform smart gate locker service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_gateLock_ctrl(evs_service_gateLock_ctrl *param, evs_service_feedback_gateLock_ctrl *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_orderCharge() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_orderCharge() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform order-charge strategy service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_orderCharge(evs_service_orderCharge *param, evs_service_feedback_orderCharge *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_get_config() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_get_config() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform device configuration get service by result through SDK.
|
||
*---
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_get_config(evs_data_dev_config *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_get_maintain_status() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_get_maintain_status() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform device configuration get service by result through SDK.
|
||
*---
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_get_maintain_status(evs_service_feedback_maintain_query *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_update_config() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_update_config() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform update devicce configuration service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_update_config(evs_data_dev_config *param, int *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_update_fun_config() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_update_fun_config() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform update devicce function configuration service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_update_fun_config(evs_service_dev_fun_config *param, evs_service_feedback_dev_fun_config *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_get_fun_config() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_get_fun_config() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform get devicce function configuration service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_get_fun_config(evs_service_get_dev_fun_config *param, evs_service_dev_fun_config *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_fee_model_query() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_fee_model_query() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform query feemodel service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_fee_model_query(evs_service_feedback_feeModel_qurey *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_reserve_charge() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_reserve_charge() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief Reply IOT platform reserve charge service by param through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_reserve_charge(evs_service_rsvCharge *param, evs_service_feedback_rsvCharge *result);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_ota_update() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_ota_update() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief perform the ota order from IOT platform .
|
||
*---
|
||
* @param [in] version: @n the new firmware version received from IOT platform.
|
||
*
|
||
* @return do not update device -1 update device 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_ota_update(const char *version);
|
||
|
||
/**
|
||
*
|
||
* 函数 callback_service_time_sync() 需要SDK的使用者针对SDK将运行的硬件平台填充实现, 供SDK调用
|
||
* ---
|
||
* Interface of callback_service_time_sync() requires to be implemented by user of SDK.
|
||
*
|
||
*
|
||
*/
|
||
/**
|
||
* @brief send timestamp that Recived from IOT platform to user by timestamp through SDK.
|
||
*---
|
||
* @param [in] param: @n the param received from IOT platform.
|
||
* @param [out] result: @n the result data will be written by user of SDK.
|
||
* @return failed -1 success 0.
|
||
* @see None.
|
||
* @note None.
|
||
*/
|
||
int callback_service_time_sync(const unsigned int timestamp);
|
||
|
||
#endif
|
||
|